Part #: PUFP-CT-OW-2USB
Availability: In Stock - ships within 1 business day
Condition: New | No Sales Tax
Return Policy: 30 Day Guarantee
The PUFP-CT-OW-2USB by Lew Electric is a pop up power box designed to be installed in a countertop surface in dry or wet locations, they are ideal for kitchen islands, bars, restaurants, hotels, or anywhere that you need a kitchen certified power pop up. The top is off white with a chrome trim and creates an elegant look in any kitchen. When you need access to your power simply push the button and your power pops up ready for you to plug into the outlets, when you are done press it shut till it closes. The power receptacle features two 15 amp tamper resistant outlets and two charging USB ports. The 2 USB charging ports share 3.6A and are smart ports, they automatically adjust to your device to charge the perfect amount. To install the outlet it must be hardwired as it does not come with a corded plug.
The pop up is IP44 rated for wet applications and is also splash rated. On the underside of the bezel there is a waterproof gasket that keeps water from entering from your countertop. The pop up only takes up 3 1/8" of space under your counter so it can be installed in almost any location. Use a pop up in a counter for quick access to power when a wall outlet is not possible and to keep dangerous cords hanging from kitchen counters.
Installation is easy, to install cut your 4 1/16" x 4 1/16" hole in your countertop. From the underside of your counter install the included back box with construction adhesive for granite or quartz, and wood screws for a Formica or wood countertop. When installed run your wire into the rear knockout of the back box and connect your bare wires to the terminal block on the pop up, when finished push as much wire out from the box and the remaining push flat in the bottom of the box. Next, pop open the unit and with the provided 2 screws secure to the back box. Lastly, test the opening speed of the unit by pressing the button and holding till it pops up, to close press the button and push till it latches shut. If the opening speed needs to be adjusted use a Phillips screwdriver to adjust the speed of the pop up.
The PUFP-CT-OW-2USB passes electrical code for kitchen use in a variety of ways. First, the two plugs feature tamper resistant outlets. Second, the outlet is a UL listed receptacle #E60120 and conforms to UL code 514A and 498. Third, the entire unit is ETL and cETL listed to code 3176286 and complies with NEC code 406.5E for countertop use in the USA and Canada.
ETL listed for the USA and Canada
Complies with NEC code 406.5(E) for use in countertops
Bezel dimensions: 4 7/8" X 4 11/16"
Cutout dimensions: 4 1/16" x 4 1/16" ***It is recommended to have the product in hand before cutting***
Space Needed Below Counter: 3.13"
Counter thickness: 1/2" to 2";
Back box dimensions: 3 15/16" x 4"
Includes back box shown in picture
Two 15A power outlets and two charging USB ports
Tamper resistant outlets
Waterproof gasket under bezel
Warranty: 1 year
|Kitchen 15A & USB charging pop up|
|Off white with chrome trim top|
|Splash proof rated|
|Tamper resistant outlets|
|NEC code 406.5E for countertops|
|USA ETL & Canada c-ETL listed|
|Waterproof gasket under bezel|
|Two shared 3.6 amp USB charging ports and two 15A power outlets|
|The two USB charging ports are smart charging ports and automatically adjust to the device that needs charged|
|ETL listed for the USA|
|cETL listed for Canada and CSA approved|
|IP44 splash rated|
|Flush when closed, pops open when needed|
|Includes back box shown in picture|
|Bezel dimensions: 4 7/8" X 4 11/16"|
|Cutout dimensions: 4 1/16" x 4 1/16" ***It is recommended to have the product in hand before cutting***|
|Space Needed Below Counter: 3.13"|
|Counter thickness: 1/2" to 2"|
|Back box dimensions: 3 15/16" x 4"|
|Not designed for outdoor applications|
|Warranty: 1 year|
|Tools needed for installation: Construction adhesive, crimping pliers/wire strippers, phillips head screwdriver, drill|
|Please contact your local electrical inspector prior to installation, installation should only be done by a licensed electrical installer|